Here at Inspect My Gadget, we have looked at a number of programs that change your screen resolution quickly and easily. We have also looked at using these resolution changing programs in batch files so that an individual program can load at a certain resolution. This method works quite well, but I have just come across a program that is much tidier and efficient at achieving this.

Res-o-matic is a utility that helps you to create shortcuts to any program, where you can define the resolution, colour depth and refresh rate you want the program to run at.

Res-o-matic couldn’t be any easier to use. It does all the hard work for you. I looked at the shortcut it had created, and its target is:

"C:\resomatic\reso.exe" "C:\WINDOWS\system32\calc.exe" 320 200 32 60

This example loads up Windows Calculator at 320×200 resolution with 32bit colour at 60Hz. When you launch the shortcut, there is no hint that Res-o-matic is working in the background. Closing the program down again will cause the resolution to return to its default values.

Res-o-matic will suck up a tiny 9kb of your hard drive. This program will certainly make my life easier. I need to run Vista Media Centre at 640×480 at 60hz. Up until now, batch files was the easiest way I knew how to do it in an automated process.

Res-o-Matic is available for free from bChecks Apps.

Here at Inspect My Gadget, we have already shown you how to make shortcuts to change screen resolutions. Shortcuts are a very quick and efficient method to launch programs. We can take this much further and use shortcuts to perform a whole range of supposedly simple tasks.

NirCmd is a command line utility that looks after a huge range of tasks. Some of the things NirCmd can simplify for you include:

• Adjust volume, mute
• Turn off, log off, enter standby mode
• Change resolution
• Enable/disable screensaver
• Open/Close a CD drive tray
• And much more

The easiest way to set this up is to copy the program to the root of your C:, right click on the program and create a shortcut. You can then edit the shortcut with the necessary arguments. Check out the NirSoft website to find the arguments to achieve your desired task.

The formatting is similar to most other programs that allow for arguments. An example is below.

nircmd.exe monitor off

While shortcuts are a quick way to achieve any of these tasks, you could also use NirCmd in batch files. It would be a good way to set the volume of a music player on launch, or to disable the screensaver while watching a movie.

NirCmd may just spare you from that one niggling task, where you have had to go through various menus to get it to happen in the past.

NirCmd is available for free from NirSoft.

Windows and Vista Media Centers are a great option for anyone wanting to turn their computer into a home theatre PC. Their interfaces look nice and they are easy to use. Get the most out of it by viewing all your music and pictures, or even schedule recordings, while you are away from home.

Having researched a number of programs designed for this task (and having very limited success with them) I had been using Remote Desktop to schedule recordings when I was away from home. That was until I read a detailed article from Lifehacker showing us the inner workings of Webguide. This article has plenty of helpful tips and screenshots to guide you through it. 

Webguide is accessed through a web browser and delivers a powerful set of features. You are able to view pictures, stream music and movies. You can even remote control your Media Centre all through the web interface. My favourite feature would have to be the ability to schedule recordings while on the road.

Webguide was much easier to install than any of the other web control systems I have tried. There is no need to install Apache as Webguide comes with its own web server. It all works straight out of the box if you are using it on a local network.

Making it accessible from computers that are not on your local network is a bit more challenging. You will need to setup port forwarding and install IIS, but there are enough instructions available to get you going.

I recommend giving this one a go. I am already enjoying the freedom Webguide offers. I encourage you to read Lifehacker’s article in parallel with the FAQ of the Webguide website to make the install easier on you. And yes, of course Webguide is free.

Text to speech is bound to become a more popular feature in upcoming computer systems in the years to come. It has been around for quite a while, but most of the current software available is not quite up to scratch.

Have a play with it before it becomes commonplace, with Ultra Hal’s Text to Speech Reader(UHTTSR). UHTTSR is a utility that runs in your task tray that will convert text to speech.

UHTTRS will read out anything that you copy to the clipboard. This way you are able to read out just about any text that confronts you. Web pages and documents can all be copied to the clipboard easily. You can then save the spoken text as a wav file for playback later. A simple MP3 conversion using another program will allow you to get the file over to a mobile device. 

If you use AIM, ICQ or MSN messengers, UHTTRS may be very useful to you. As a new message arrives, UHTTRS will automatically read them out aloud to you. This lets you stay away from your computer until you want to reply.

The results aren’t very good with the default voices that come with Windows, but there are more free voices available that sound much better. Check out this Inspect My Gadget article to find out more.

There are a lot of commercial text to speech options available. TextAloud was recommended to me and it looks great. I am surprised there aren’t a great deal of free options out there as I used to enjoy playing with text to speech programs when I got my first Sound Blaster 16.

Ultra Hal Text to Speech Reader is available for free from Zabaware.

Most phone manufacturers brand their phones with a startup sound. This is often an annoying feature for those that have a phone which won’t let you disable it. Windows Mobile users are blessed as they don’t need to put up with this sound each time their device starts up. This is because Microsoft has not included a startup sound in their mobile operating system. Maybe just because there isn’t a startup sound, many people crave for it. Reverse psychology and all that.

Well now there is a way. AudioBoot is a Windows Mobile utility that will add a startup sound to your device. As your device boots up, while the boot screens are still on display, your startup sound will come alive through your devices speakers.

AudioBoot comically plays the Windows XP startup sound by default, but this can be changed by copying any MP3 to your root directory and renaming it startup.mp3. Most other platforms don’t allow you to change your startup sound. It’s not a reason to buy Windows Mobile, but it’s a nice touch.

Available for free via FreewarePPC.com. If you are not an XDA forums member, download Audioboot from the mirror.